رد: طلب شرح مصور لادخال اشتراك نيوكامد لجهاز توب سات 2051fae
تشغيل الشيرينج علي التوب سات
Go to menu, system settings, network,service setup
select type type DreamNet
softcam Newcamd
autoconnection is not working in the beta
server no 1 (or what ever you want)
card type is not really used - just enter what you want
Select connection type and enter URL or IP and port
Press F2 and select to save - receiver will reboot.
Again go to the service setup menu.
Press F2, and the login dialog will open
Enter the id and password. use correct capitals if needed.
Enter the DES key
Serve name is not much used, just enter a name or leave blank.
Press F1 and you will get connected.
To get connected again after re-boot, you have to go to the service setup menu and press F2 and F1
If you press F3 you will see the connection status. "ready to service" means you are connected.
any question or problems getting connected to newcamd please post it here.
رد: طلب شرح مصور لادخال اشتراك نيوكامد لجهاز توب سات 2051fae
pictures tutorial showing how to setup newcamd on tecview
1-go to menu and select system setting
2-go to network and press ok
3-select service setup and press ok
4-new window will appear select type and change to dream net hit f2(green button) pop up message will appear hit f1(red button)your stb will reboot
5-when your stb reboot got menu and repeat as showing previously
6-when you get the picture as showing on setup(5) hit f2(green button) pop up message will appear then enter parameter server details
7-when you enter server details hit f1(red button) to save then exit hit f4(yellow button) then f1(red button for key selector you need to do that for the suitable ch id to get the picture if you don't get picture try (f4) then (f2) for resetting ch id if still no picture try to reboot your stb.
هذا الموقع يستخدم ملفات تعريف الارتباط (الكوكيز ) للمساعدة في تخصيص المحتوى وتخصيص تجربتك والحفاظ على تسجيل دخولك إذا قمت بالتسجيل.
من خلال الاستمرار في استخدام هذا الموقع، فإنك توافق على استخدامنا لملفات تعريف الارتباط.